Click here

HEADLIGHT CLEANER SWITCH INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedures for LHD and RHD vehicle.

  • The procedure listed below are for LHD vehicle.

Click here
  1. Click here

    INSTALL HEADLIGHT CLEANER SWITCH ASSEMBLY


    1. A015CQW

      Attach the 2 claws to install the switch.

  2. Click here

    INSTALL NO. 1 SWITCH HOLE BASE


    1. Connect the connectors.

    2. Attach the 4 claws to install the No. 1 switch hole base.

  3. Click here

    INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. Connect the connectors.

    2. A0158MF

      for Automatic Air Conditioning System:


      1. Attach the 2 claws to install the room temperature sensor.

    3. A0156SA

      Attach the 2 claws to connect the 2 control cables.

    4. w/ Driver Side Knee Airbag:


      1. Attach the 16 claws to install the lower No. 1 instrument panel finish panel.

      2. A015CUJ

        Install the 2 bolts.

    5. w/o Driver Side Knee Airbag:


      1. Attach the 9 claws to install the lower No. 1 instrument panel finish panel.

      2. A015A9A

        Install the 2 bolts.

    6. A015ATT

      Attach the 2 claws to close the hole cover.

  4. Click here

    INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)


    1. Connect the connectors.

    2. Attach the 3 claws to install the No. 1 instrument panel under cover.

    3. Install the 2 screws.

  5. Click here

    INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. A0156L8E01

      Attach the 2 claws to install the No. 2 instrument cluster finish panel garnish.

      Table 1. Text in Illustration
      *A w/ Entry and Start System *B w/o Entry and Start System
  6. Click here

    INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. Attach the 3 claws to install the No. 1 instrument cluster finish panel garnish.

  7. Click here

    INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. w/o Console Box Lid:


      1. Install the lower instrument panel pad sub-assembly LH (Click here).

    2. w/ Cool Box:


      1. Install the lower instrument panel pad sub-assembly LH (Click here).

    3. w/o Cool Box:


      1. Install the lower instrument panel pad sub-assembly LH (Click here).

  8. Click here

    INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. w/o Console Box Lid:


      1. Install the No. 2 instrument panel finish panel cushion (Click here).

    2. w/ Cool Box:


      1. Install the No. 2 instrument panel finish panel cushion (Click here).

    3. w/o Cool Box:


      1. Install the No. 2 instrument panel finish panel cushion (Click here).