WASHER NOZZLE (for Double Swing Out Type) ON-VEHICLE INSPECTION


  1. INSPECT REAR WASHER NOZZLE


    1. With the engine running, check that the center stream of washer fluid sprays on the back door glass within the hatched area shown in the illustration.

      Standard
      Washer fluid hits the back door glass in the area shown in the illustration.
      A015638E01
      Standard Measurement
      Area Specified Condition
      A 33 mm (1.30 in.)
      B 18 mm (0.71 in.)
      C 100 mm (3.94 in.)
      D 48.5 mm (1.91 in.)
      Text in Illustration
      *1 Back Door Glass Edge

      If the result is not as specified, adjust the rear washer nozzle.