Click here

WASHER MOTOR (for Front Side) REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE FRONT FENDER MUDGUARD LH


    1. Remove the clip.

    2. Using a T30 "TORX" socket, remove the 4 screws and mudguard.

  2. Click here

    REMOVE SIDE STEP ASSEMBLY LH


    1. A0157CD

      Remove the 6 bolts and side step.

  3. Click here

    REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH


    1. Remove the 8 side mudguard retainers and screw.

    2. A015CORE01

      Detach the 10 clips and remove the rocker panel moulding.

  4. Click here

    REMOVE FRONT FENDER LINER LH


    1. Remove the 2 screws.

    2. Using a T30 "TORX" socket, remove the 2 screws.

    3. A0155JN

      Using a clip remover, remove the 2 grommets, 12 clips and fender liner.

  5. Click here

    DRAIN WASHER FLUID


    1. A015BWY

      Remove the washer hose from the windshield washer motor and pump, and drain the washer fluid.

  6. Click here

    REMOVE WASHER INLET SUB-ASSEMBLY


    1. A01562S

      Using a clip remover, remove the clip and washer inlet.

  7. Click here

    REMOVE WINDSHIELD WASHER JAR ASSEMBLY


    1. A015E4YE01

      w/ Headlight Cleaner System:


      1. Detach the clamp.

      2. Disconnect the 2 connectors.

      3. Disconnect the headlight cleaner hose.

    2. w/o Headlight Cleaner System:


      1. Detach the clamp.

      2. Disconnect the connector.

    3. A015CV4

      Remove the 4 bolts. Then remove the windshield washer jar.

  8. Click here

    REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A015A2N

      Remove the windshield washer motor and pump assembly together with the gasket in the direction shown in the illustration.