REAR WIPER RUBBER (for Double Swing Out Type) REPLACEMENT


  1. REMOVE REAR WIPER BLADE


    1. A015CCD

      Detach the claw as shown in the illustration.

    2. A015A7L

      Remove the rear wiper blade as shown in the illustration.

      Note

      Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the windshield surface.

  2. REMOVE REAR WIPER RUBBER


    1. A0157SF

      Detach the head part (large side) of the rear wiper rubber from the rear wiper blade.

    2. A0155MZE01
      Text in Illustration
      *a Head Part (Large Side)

      Remove the rear wiper rubber in the direction indicated by the arrow in the illustration.

      Note

      Do not pull out the wiper rubber forcibly. Doing so will deform the backing plate or damage the blade claw.

    3. Remove the 2 backing plates from the rear wiper rubber.

  3. INSTALL REAR WIPER RUBBER


    1. A015CNNE05
      Text in Illustration
      *a Curved

      Install the 2 backing plates to the rear wiper rubber.

      Note

      Install the backing plates facing the proper direction.

    2. A015AFJE01
      Text in Illustration
      *a Head Part (Large Side)

      Install the rear wiper rubber to the claw of the wiper blade in the direction indicated by the arrow in the illustration.

      Tech Tips

      Install the rear wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle side.

    3. A0156VH

      Attach the head part (large side) of the rear wiper rubber to the rear end side claw of the rear wiper blade.

      Note

      Push the rear wiper blade into the grooves of the rear wiper rubber to attach them completely.

  4. INSTALL REAR WIPER BLADE


    1. A015BAW

      Attach the claw to install the rear wiper blade.