Click here

REAR WIPER RUBBER INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL REAR WIPER RUBBER


    1. A0155ZE

      Install the rear wiper rubber to the 2 rear wiper rubber backing plates.

      Note:

      Install the backing plates in the correct direction.

    2. A015974

      Insert the rear wiper rubber from the claw position of the middle of the rear wiper blade to the end.

    3. A0157CU

      After passing the rear wiper rubber through the rear end side claw, allow it to stick out from the rear end stopper and slide it through the front tip side claw.

  2. Click here

    INSTALL REAR WIPER BLADE


    1. Hold the wiper blade at the same angle it was removed at and attach the claw to install it.