REAR WIPER MOTOR REMOVAL


  1. REMOVE CENTER BACK DOOR GARNISH


    1. A015C1G

      Detach the 5 clips and 4 claws, and remove the center back door garnish.

  2. REMOVE BACK DOOR SIDE GARNISH LH


    1. A015931

      Detach the 3 clips and 2 claws, and remove the back door side garnish LH.

  3. REMOVE BACK DOOR SIDE GARNISH RH


    1. w/o Power Back Door:

      Tech Tips

      Use the same procedure described for the LH side.

    2. A0159ZC

      w/ Power Back Door:


      1. Detach the clip and 4 claws, and remove the back door side garnish RH.

  4. REMOVE ASSIST GRIP (for Face to Face Seat Type)


    1. A015CXW

      Remove the 2 screws and assist grip.

  5. REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)


    1. A0155CR

      Using a screwdriver, detach the 4 claws and remove the No. 2 back door service hole cover.

    2. Disconnect connector.

  6. REMOVE DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)


    1. A015CF4

      Detach the 2 claws and remove the door opening switch sub-assembly.

  7. REMOVE BACK DOOR GARNISH


    1. A0157HD

      Using a screwdriver, detach the 14 clips and remove the back door garnish.

      Tech Tips

      Tape the screwdriver tip before use.

  8. REMOVE REAR WIPER ARM


    1. A015730

      Open the cover.

    2. Remove the nut and rear wiper arm.

  9. REMOVE REAR WIPER MOTOR GROMMET


    1. A0155YH

      Detach the rear wiper motor grommet.

  10. REMOVE REAR WIPER MOTOR ASSEMBLY


    1. A0156T7

      Disconnect the connector.

    2. Remove the 3 bolts and rear wiper motor assembly.