Click here

REAR WIPER MOTOR REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE CENTER BACK DOOR GARNISH


    1. A015C1G

      Detach the 5 clips and 4 claws, and remove the center back door garnish.

  2. Click here

    REMOVE BACK DOOR SIDE GARNISH LH


    1. A015931

      Detach the 3 clips and 2 claws, and remove the back door side garnish LH.

  3. Click here

    REMOVE BACK DOOR SIDE GARNISH RH


    1. w/o Power Back Door:

      Tip:

      Use the same procedure described for the LH side.

    2. A0159ZC

      w/ Power Back Door:


      1. Detach the clip and 4 claws, and remove the back door side garnish RH.

  4. Click here

    REMOVE ASSIST GRIP (for Face to Face Seat Type)


    1. A015CXW

      Remove the 2 screws and assist grip.

  5. Click here

    REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)


    1. A0155CR

      Using a screwdriver, detach the 4 claws and remove the No. 2 back door service hole cover.

    2. Disconnect connector.

  6. Click here

    REMOVE DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)


    1. A015CF4

      Detach the 2 claws and remove the door opening switch sub-assembly.

  7. Click here

    REMOVE BACK DOOR GARNISH


    1. A0157HD

      Using a screwdriver, detach the 14 clips and remove the back door garnish.

      Tip:

      Tape the screwdriver tip before use.

  8. Click here

    REMOVE REAR WIPER ARM


    1. A015730

      Open the cover.

    2. Remove the nut and rear wiper arm.

  9. Click here

    REMOVE REAR WIPER MOTOR GROMMET


    1. A0155YH

      Detach the rear wiper motor grommet.

  10. Click here

    REMOVE REAR WIPER MOTOR ASSEMBLY


    1. A0156T7

      Disconnect the connector.

    2. Remove the 3 bolts and rear wiper motor assembly.