BACK DOOR SUPPORT DISPOSAL


  1. DISPOSE OF BACK DOOR STAY ASSEMBLY LH


    1. A015BI5E01

      Horizontally fix the stay in a vise with the piston-rod pulled out.

    2. Using a metal saw, gradually cut any area between A and B to release the gas.

      Standard Measurement
      Area Specified Condition
      a 150 mm (5.91 in.)
      b 20 mm (0.787 in.)

      CAUTION:

      As metal debris may be blown outward by the gas, you must:


      • Wear protective glasses.

      • Cover the area being cut.

      Note

      The gas inside the hood support is colorless, odorless and harmless. As there is a possibility that metal debris could scatter, cover the back door stay with a piece of cloth or other material.