Click here

POWER BACK DOOR TOUCH SENSOR REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE LOWER BACK DOOR STOPPER CUSHION


    1. A0156OB

      Remove the 4 bolts and 2 lower back door stopper cushions.

  2. Click here

    REMOVE CENTER BACK DOOR GARNISH


    1. A015C1G

      Detach the 5 clips and 4 claws, and remove the center back door garnish.

  3. Click here

    REMOVE BACK DOOR SIDE GARNISH LH


    1. A015931

      Detach the 3 clips and 2 claws, and remove the back door side garnish LH.

  4. Click here

    REMOVE BACK DOOR SIDE GARNISH RH


    1. w/o Power Back Door:

      Tip:

      Use the same procedure described for the LH side.

    2. A0159ZC

      w/ Power Back Door:


      1. Detach the clip and 4 claws, and remove the back door side garnish RH.

  5. Click here

    REMOVE BACK DOOR GARNISH


    1. A0157HD

      Using a screwdriver, detach the 14 clips and remove the back door garnish.

      Tip:

      Tape the screwdriver tip before use.

  6. Click here

    REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH


    1. A0157KQ

      Disconnect the connector.

    2. A015B5K

      Using a T25 "TORX" wrench, remove the 6 screws.

    3. Detach the 2 clips and remove the power back door sensor assembly LH.

  7. Click here

    REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH

    Tip:

    Use the same procedure described for the LH side.