POWER BACK DOOR TOUCH SENSOR REMOVAL


  1. REMOVE LOWER BACK DOOR STOPPER CUSHION


    1. A0156OB

      Remove the 4 bolts and 2 lower back door stopper cushions.

  2. REMOVE CENTER BACK DOOR GARNISH


    1. A015C1G

      Detach the 5 clips and 4 claws, and remove the center back door garnish.

  3. REMOVE BACK DOOR SIDE GARNISH LH


    1. A015931

      Detach the 3 clips and 2 claws, and remove the back door side garnish LH.

  4. REMOVE BACK DOOR SIDE GARNISH RH


    1. w/o Power Back Door:

      Tech Tips

      Use the same procedure described for the LH side.

    2. A0159ZC

      w/ Power Back Door:


      1. Detach the clip and 4 claws, and remove the back door side garnish RH.

  5. REMOVE BACK DOOR GARNISH


    1. A0157HD

      Using a screwdriver, detach the 14 clips and remove the back door garnish.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH


    1. A0157KQ

      Disconnect the connector.

    2. A015B5K

      Using a T25 "TORX" wrench, remove the 6 screws.

    3. Detach the 2 clips and remove the power back door sensor assembly LH.

  7. REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.