HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL


  1. REMOVE UPPER RADIATOR SUPPORT SEAL


    1. Remove the 7 clips and radiator support seal.

      A015BVKE02

  2. REMOVE FRONT FENDER MAIN SEAL LH (for LHD)


    1. A0155CK

      Using a screwdriver, detach the 3 clips and remove the fender main seal.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE FRONT FENDER MAIN SEAL RH (for RHD)


    1. A01560N

      Using a screwdriver, detach the 3 clips and remove the fender main seal.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT BUMPER WINCH COVER SUB-ASSEMBLY (w/ Winch)


    1. A0156DU

      Detach the 2 claws.

    2. Detach the 3 guides and remove front bumper winch cover sub-assembly.

  5. REMOVE RADIATOR GRILLE ASSEMBLY


    1. A0157G3E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the radiator grille assembly.

    2. Remove the 3 screws.

    3. Detach the 2 clips and 8 claws, and remove the radiator grille assembly.

    4. w/ Wide View Front Monitor System:


      1. Disconnect the connector.

  6. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)


    1. A01593K

      Disconnect the sensor connector.

    2. Remove the 3 bolts and sensor.

  7. REMOVE HOOD LOCK CONTROL CABLE COVER


    1. A015CXLE01

      Remove the 3 screws.

    2. Detach the claw and remove the cable cover.

  8. REMOVE HOOD LOCK NUT CAP


    1. A015BRBE01

      Using a screwdriver, remove the hood lock nut cap as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

  9. REMOVE HOOD LOCK ASSEMBLY


    1. A01576CE01

      Remove the 2 bolts and nut.

    2. Remove the hood lock.

    3. Disconnect the connector.

    4. A015ASRE01

      Disconnect the hood lock control cable.

  10. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A0158RV

      Detach the 2 claws.

    2. Disconnect the hood lock control cable and remove the hood lock lever.

  11. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)

    A0157XP

    1. Using a screwdriver, disconnect the clamps shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the cable from the engine room and remove it.

  12. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)

    A0158Y5

    1. Using a screwdriver, disconnect the clamps shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the cable from the engine room and remove it.