POWER BACK DOOR CONTROL SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for LHD and RHD vehicles.

  • The procedure listed below are for LHD vehicles.


  1. INSTALL DOOR CONTROL SWITCH


    1. Attach the 4 claws to install the door control switch.

  2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. Connect the connectors.

    2. A0158MF

      for Automatic Air Conditioning System:


      1. Attach the 2 claws to install the room temperature sensor.

    3. A0156SA

      Attach the 2 claws to connect the 2 control cables.

    4. w/ Driver Side Knee Airbag:


      1. Attach the 16 claws to install the lower No. 1 instrument panel finish panel.

      2. Install the 2 bolts.

        A015CUJ

    5. w/o Driver Side Knee Airbag:


      1. Attach the 9 claws to install the lower No. 1 instrument panel finish panel.

      2. Install the 2 bolts.

        A015A9A
    6. A015ATT

      Attach the 2 claws to close the hole cover.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    A015B20

    1. Connect the connectors.

    2. Attach the 3 claws to install the No. 1 instrument panel under cover.

    3. Install the 2 screws.

  4. INSTALL COWL SIDE TRIM BOARD LH

    A0156SP

    1. Attach the 2 clips to install the cowl side trim board.

    2. Install the cap nut.

  5. INSTALL FRONT DOOR SCUFF PLATE LH

    A0157IK

    1. Attach the 7 claws and 4 clips to install the scuff plate.