Click here

POWER BACK DOOR MAIN SWITCH INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedure for LHD and RHD vehicles.

  • The procedure listed below are for LHD vehicles.

Click here
  1. Click here

    INSTALL POWER BACK DOOR MAIN SWITCH


    1. Attach the 2 claws to install the power back door main switch.

  2. Click here

    INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. Connect the connectors.

    2. A0158MF

      for Automatic Air Conditioning System:


      1. Attach the 2 claws to install the room temperature sensor.

    3. A0156SA

      Attach the 2 claws to connect the 2 control cables.

    4. w/ Driver Side Knee Airbag:


      1. Attach the 16 claws to install the lower No. 1 instrument panel finish panel.

      2. A015CUJ

        Install the 2 bolts.

    5. w/o Driver Side Knee Airbag:


      1. Attach the 9 claws to install the lower No. 1 instrument panel finish panel.

      2. A015A9A

        Install the 2 bolts.

    6. A015ATT

      Attach the 2 claws to close the hole cover.

  3. Click here

    INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)


    1. Connect the connectors.

    2. Attach the 3 claws to install the No. 1 instrument panel under cover.

    3. Install the 2 screws.

  4. Click here

    INSTALL COWL SIDE TRIM BOARD LH


    1. Attach the 2 clips to install the cowl side trim board.

    2. Install the cap nut.

  5. Click here

    INSTALL FRONT DOOR SCUFF PLATE LH


    1. Attach the 7 claws and 4 clips to install the scuff plate.