QUARTER WINDOW GLASS REMOVAL

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.


  1. REMOVE ROOF HEADLINING ASSEMBLY (w/o Sliding Roof)


    1. Remove the roof headlining Click here.

  2. REMOVE ROOF HEADLINING ASSEMBLY (w/ Sliding Roof)


    1. Remove the roof headlining Click here.

  3. REMOVE QUARTER WINDOW ASSEMBLY

    A0159FGE01

    Tech Tips

    Apply protective tape to the outer surface of the vehicle body to prevent scratches.

    Note

    When separating the quarter window glass from the vehicle, be careful not to damage the vehicle paint or interior/exterior ornaments.


    1. Disconnect the connectors.

    2. From the interior, insert a piano wire between the vehicle body and the quarter window glass as shown in the illustration.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Cut through the adhesive by pulling the piano wire around the quarter window glass.

      Note

      Leave as much adhesive on the vehicle body as possible when removing the quarter window glass.

    5. Using suction cups, remove the quarter window glass.

  4. CLEAN VEHICLE BODY

    A0158OUE09

    1. Clean and shape the contact surface of the vehicle body.


      1. On the contact surface of the vehicle body, use a knife to cut away excess adhesive as shown in the illustration.

        Tech Tips

        Leave as much adhesive on the vehicle body as possible.

        Note

        Be careful not to damage the vehicle body.

      2. Clean the contact surface of the vehicle body with cleaner.

        Tech Tips

        Even if all the adhesive has been removed, clean the vehicle body.