POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows) All Power Window Up Functions do not Operate with Entry Lock Switch

DESCRIPTION

When an entry lock switch is pressed and held for approximately 3 seconds: 1) the main body ECU receives a signal via the driver side door ECU, 2) the main body ECU transmits a signal to all the power window regulator motor, and 3) all the power window motors are activated to close the windows.

INSPECTION PROCEDURE

PROCEDURE

1. Click here

   CHECK BASIC FUNCTION (ENTRY & START SYSTEM (for Entry Function))

   
   

   1. Check that the entry lock switch operates (Click here).

      OK
      Entry lock switch can lock all the doors.

   
   
   • OKClick here
   • NGClick here
2. Click here

   GO TO ENTRY & START SYSTEM (for Entry Function)Click here

3. Click here

   REPLACE MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)