FRONT PASSENGER SIDE POWER WINDOW SWITCH INSPECTION

INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Models with Jam Protection Function on 4 Windows)

1. 

   Text in Illustration

   *1	LED
   *a	Component without harness connected (Power Window Regulator Switch Assembly)

   Measure the resistance according to the value(s) in the table below.

   Standard Resistance
   Tester Connection Switch Condition Specified Condition 6 (UP) - 1 (GND) Manual up operation Below 1 Ω 7 (DOWN) - 1 (GND) Manual down operation Below 1 Ω 8 (AUTO) - 1 (GND) Auto up/down operation Below 1 Ω

   
   

   • If the result is not as specified, replace the power window regulator switch assembly.

2. Check that the LED illuminates.

   
   

   1. Apply battery voltage to the power window regulator switch and check that the LED illuminates.

      OK
      Measurement Condition Specified Condition Battery positive (+) → 4 (LED) Battery negative (-) → 1 (GND) LED illuminates

      
      

      • If the result is not as specified, replace the power window regulator switch assembly.

        Text in Illustration

        *1	LED
        *a	Component without harness connected (Power Window Regulator Switch Assembly)

INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Models with Jam Protection Function on Driver Door Window Only)

1. 

   Text in Illustration

   *a	Component without harness connected (Power Window Regulator Switch Assembly)

   Measure the resistance according to the value(s) in the table below.

   Standard Resistance
   Tester Connection Switch Condition Specified Condition 4 (U) - 3 (B) 2 (SD) - 1 (D) UP Below 1 Ω 5 (SU) - 4 (U) 2 (SD) - 1 (D) OFF Below 1 Ω 5 (SU) - 4 (U) 3 (B) - 1 (D) DOWN Below 1 Ω

   
   

   • If the result is not as specified, replace the power window regulator switch assembly.

     Text in Illustration

     *a	Component without harness connected (Power Window Regulator Switch Assembly)