FRONT CONSOLE BOX (w/o Console Box Lid) INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL LOWER CONSOLE BOX

    A0159W7

    1. Attach the 2 claws to install the lower console box.

    2. Install the 2 screws and 4 bolts.

  2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

    A015AV5

    1. Attach the 8 claws to install the upper console panel sub-assembly.

  3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    A015BGS

    1. Install the shift lever knob and twist it in the direction indicated by the arrow.

  4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Attach the 12 claws to install the rear upper console panel sub-assembly.

      A015AUH

  5. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH


    1. Attach the 8 claws to install the upper No. 2 console panel garnish.

      A015DQTE01
      Text in Illustration
      *A for Separate Seat Type *B for Bench Seat Type

  6. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH

    A0155IC

    1. Attach the 8 claws to install the upper No. 1 console panel garnish.

  7. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    A015A00

    1. Connect the connectors.

    2. Attach the 7 claws to install the lower center instrument cluster finish panel sub-assembly.

  8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    A015BUX

    1. Connect the connectors and attach the 2 clamps.

    2. Attach the 8 claws to install the lower instrument panel pad sub-assembly.

    3. Install the clip and screw.

  9. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    A0155LC

    1. Attach the 7 claws to install the No. 2 instrument panel finish panel cushion.

  10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    A015BRH

    1. Attach the 7 claws to install the lower instrument panel pad sub-assembly.

    2. Install the clip and screw.

  11. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    A01556Z

    1. Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.

  12. INSTALL FRONT SEAT ASSEMBLY RH

    Click here