Click here

INSTRUMENT PANEL SAFETY PAD REASSEMBLY

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart (Click here).

Click here
  1. Click here

    INSTALL NO. 2 INSTRUMENT PANEL WIRE (for LHD)


    1. A0155IT

      Attach the clamps to install the No. 2 instrument panel wire to the instrument panel.

  2. Click here

    INSTALL NO. 2 INSTRUMENT PANEL WIRE (for RHD)


    1. A015DLV

      Attach the clamps to install the No. 2 instrument panel wire to the instrument panel.

  3. Click here

    INSTALL ANTENNA CORD SUB-ASSEMBLY (w/o Multi-display)


    1. A015B3P

      for LHD:

      Attach the 7 clamps to install the antenna cord.

    2. A0155DD

      for RHD:

      Attach the 5 clamps to install the antenna cord.

  4. Click here

    INSTALL ANTENNA CORD SUB-ASSEMBLY (w/ Multi-display)


    1. A015ALD

      for LHD:

      Attach the 8 clamps to install the antenna cord.

    2. A01594I

      for RHD:

      Attach the 6 clamps to install the antenna cord.

  5. Click here

    INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Multi-display)


    1. for LHD:


      1. Install the navigation antenna assembly with the 2 screws.

      2. Attach the 2 clamps.

    2. for RHD:


      1. Install the navigation antenna assembly with the 2 screws.

      2. Attach the 2 clamps.

  6. Click here

    INSTALL NO. 2 SIDE DEFROSTER NOZZLE


    1. A015A01

      Attach the 3 claws to install the No. 2 side defroster nozzle.

  7. Click here

    INSTALL NO. 1 SIDE DEFROSTER NOZZLE


    1. A015A3I

      Attach the 2 claws to install the No. 1 side defroster nozzle.

  8. Click here

    INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. A015B0O

      Attach the 11 claws to install the defroster nozzle.

  9. Click here

    INSTALL FRONT PASSENGER AIRBAG ASSEMBLY


    1. A0155N1E01

      Attach the 5 hooks (A).

    2. Attach the 5 hooks (B) to install the front passenger airbag on the instrument panel.

    3. A015748E01

      Install the 2 screws.

    4. A015A22

      Connect the 2 connectors and install the instrument panel wire assembly to the front passenger airbag.

      Note:

      When handling the airbag connector, take care not to damage the airbag wire harness.

    5. Attach the claw and install the wire.

  10. Click here

    INSTALL REAR NO. 1 AIR DUCT (w/ Rear Air Duct)


    1. A01592C

      Install the rear No. 1 air duct with the 2 screws.

  11. Click here

    INSTALL CENTER HEATER TO REGISTER DUCT


    1. A0157G9

      Install the center heater to register duct with the 3 screws.