Click here

INSTRUMENT PANEL SAFETY PAD DISASSEMBLY

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    REMOVE CENTER HEATER TO REGISTER DUCT


    1. A0157G9

      Remove the 3 screws and center heater to register duct.

  2. Click here

    REMOVE REAR NO. 1 AIR DUCT (w/ Rear Air Duct)


    1. A01592C

      Remove the 2 screws and rear No. 1 air duct.

  3. Click here

    REMOVE FRONT PASSENGER AIRBAG ASSEMBLY


    1. A015C1P

      Detach the claw and remove the wire.

    2. Disconnect the 2 connectors and remove the instrument panel wire from the front passenger airbag.

      Note:

      When handling the airbag connector, take care not to damage the airbag wire harness.

    3. A015748E01

      Remove the 2 screws.

    4. A0158T0E01

      Detach the 5 hooks (A).

    5. Detach the 5 hooks (B) and remove the front passenger airbag from the instrument panel.

  4. Click here

    REMOVE DEFROSTER NOZZLE ASSEMBLY


    1. A015B0O

      Detach the 11 claws and remove the defroster nozzle.

  5. Click here

    REMOVE NO. 1 SIDE DEFROSTER NOZZLE


    1. A015A3I

      Detach the 2 claws and remove the No. 1 side defroster nozzle.

  6. Click here

    REMOVE NO. 2 SIDE DEFROSTER NOZZLE


    1. A015A01

      Detach the 3 claws and remove the No. 2 side defroster nozzle.

  7. Click here

    REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Multi-display)


    1. for LHD:


      1. A015B3I

        Detach the 2 clamps.

      2. Remove the 2 screws and navigation antenna assembly.

    2. for RHD:


      1. A0157FU

        Detach the 2 clamps.

      2. Remove the 2 screws and navigation antenna assembly.

  8. Click here

    REMOVE ANTENNA CORD SUB-ASSEMBLY (w/ Multi-display)


    1. A015ALD

      for LHD:

      Detach the 8 clamps and remove the antenna cord.

    2. A01594I

      for RHD:

      Detach the 6 clamps and remove the antenna cord.

  9. Click here

    REMOVE ANTENNA CORD SUB-ASSEMBLY (w/o Multi-display)


    1. A015B3P

      for LHD:

      Detach the 7 clamps and remove the antenna cord.

    2. A0155DD

      for RHD:

      Detach the 5 clamps and remove the antenna cord.

  10. Click here

    REMOVE NO. 2 INSTRUMENT PANEL WIRE (for LHD)


    1. A0155IT

      Detach the clamps and remove the No. 2 instrument panel wire from the instrument panel.

  11. Click here

    REMOVE NO. 2 INSTRUMENT PANEL WIRE (for RHD)


    1. A015DLV

      Detach the clamps and remove the No. 2 instrument panel wire from the instrument panel.