Click here

REAR POWER OUTLET SOCKET REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover.

  2. Click here

    REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY LH (w/ Rear Center Seat Headrest)

  3. Click here

    REMOVE REAR SEAT CUSHION HINGE COVER LH (except Face to Face Seat Type)


    1. A01557L

      Operate the rear seat headrest handle and lower the headrest.

    2. A015785

      Operate the reclining adjuster release handle and fold down the seat.

    3. A015922

      Operate the seat cushion lock release lever and move the seat to the storage position.

    4. A015AHC

      Using a screwdriver, detach the 3 claws and remove the cover.

      Tip:

      Tape the screwdriver tip before use.

  4. Click here

    REMOVE REAR NO. 2 SEAT HINGE COVER LH (except Face to Face Seat Type)


    1. Detach the 2 claws and clip, and then remove the cover.

  5. Click here

    REMOVE REAR NO. 2 SEAT ASSEMBLY (except Face to Face Seat Type)


    1. Remove the 4 bolts and seat assembly.

      Note:

      Be careful not to damage the vehicle body.

  6. Click here

    REMOVE REAR SIDE SEAT LEG PROTECTOR LH (for Face to Face Seat Type)


    1. Using a screwdriver, detach the 2 claws and remove the protector.

      Tip:

      Tape the screwdriver tip before use.

  7. Click here

    REMOVE REAR NO. 2 SEAT ASSEMBLY (for Face to Face Seat Type)


    1. Remove the 4 bolts and rear No. 2 seat.

  8. Click here

    REMOVE REAR STEP COVER

    Tip:

    Use the same procedure to remove the step cover on the other side.


    1. Detach the 2 claws and remove the step cover.

  9. Click here

    REMOVE REAR DOOR SCUFF PLATE LH


    1. Remove the screw.

    2. Detach the 3 claws and 4 clips, and remove the scuff plate.

  10. Click here

    REMOVE REAR FLOOR MAT REAR SUPPORT PLATE


    1. Detach the 6 clips and remove the support plate.

  11. Click here

    REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

    Tip:

    Use the same procedure to remove the tonneau cover holder cap on the other side.


    1. Detach the 2 claws and remove the tonneau cover holder cap.

  12. Click here

    REMOVE REAR SEAT COVER CAP (except Face to Face Seat Type)

    Tip:

    Use the same procedure to remove the rear seat cover cap on the other side.


    1. Using a screwdriver, detach the 3 claws and remove the rear seat cover cap.

      Tip:

      Tape the screwdriver tip before use.

  13. Click here

    REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

    Tip:

    When removing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. A0158A5

      Detach the 3 claws and remove the cover.

    2. A015CT4

      Remove the bolt and rear No. 1 seat belt anchor.

    3. A0156NH

      w/ Rear No. 2 Seat, except Face to Face Seat Type:

      Remove the bolt and rear No. 2 seat belt anchor.

    4. w/ Rear No. 2 Seat, except Face to Face Seat Type:


      1. Remove the clip and bolt.

      2. Detach the 18 clips and 2 claws.

      3. w/o Rear Air Conditioning System:

        Disconnect the rear seat lock control lever cable and then remove the quarter trim panel.

      4. A0157GF

        w/ Rear Air Conditioning System:

        Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the quarter trim panel.

    5. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:


      1. Remove the clip.

      2. A0158HZ

        Detach the 18 clips and 2 claws, and remove the quarter trim panel.

    6. w/ Tonneau Cover:


      1. Remove the screw and clip.

      2. A015ARP

        Detach the 18 clips and 2 claws, and remove the quarter trim panel.

  14. Click here

    REMOVE POWER OUTLET SOCKET ASSEMBLY


    1. A0157Q3

      Disengage the 4 claws and remove the power outlet socket bezel.

    2. A0155JGE02

      Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the power outlet socket assembly.

      Table 1. Text in Illustration
      *1 Protective Tape
  15. Click here

    REMOVE POWER OUTLET SOCKET COVER NO.2


    1. A015AE8

      Disengage the 2 claws and remove the power outlet socket cover.