REAR POWER OUTLET SOCKET REMOVAL


  1. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover.

  2. REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY LH (w/ Rear Center Seat Headrest)

  3. REMOVE REAR SEAT CUSHION HINGE COVER LH (except Face to Face Seat Type)


    1. A01557L

      Operate the rear seat headrest handle and lower the headrest.

    2. A015785

      Operate the reclining adjuster release handle and fold down the seat.

    3. A015922

      Operate the seat cushion lock release lever and move the seat to the storage position.

    4. A015AHC

      Using a screwdriver, detach the 3 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE REAR NO. 2 SEAT HINGE COVER LH (except Face to Face Seat Type)

    A015AYL

    1. Detach the 2 claws and clip, and then remove the cover.

  5. REMOVE REAR NO. 2 SEAT ASSEMBLY (except Face to Face Seat Type)

    A0159NK

    1. Remove the 4 bolts and seat assembly.

      Note

      Be careful not to damage the vehicle body.

  6. REMOVE REAR SIDE SEAT LEG PROTECTOR LH (for Face to Face Seat Type)

    A015ATV

    1. Using a screwdriver, detach the 2 claws and remove the protector.

      Tech Tips

      Tape the screwdriver tip before use.

  7. REMOVE REAR NO. 2 SEAT ASSEMBLY (for Face to Face Seat Type)

    A015C5V

    1. Remove the 4 bolts and rear No. 2 seat.

  8. REMOVE REAR STEP COVER

    A0159DZ

    Tech Tips

    Use the same procedure to remove the step cover on the other side.


    1. Detach the 2 claws and remove the step cover.

  9. REMOVE REAR DOOR SCUFF PLATE LH

    A015BJQ

    1. Remove the screw.

    2. Detach the 3 claws and 4 clips, and remove the scuff plate.

  10. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

    A015BES

    1. Detach the 6 clips and remove the support plate.

  11. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

    A015DVZ

    Tech Tips

    Use the same procedure to remove the tonneau cover holder cap on the other side.


    1. Detach the 2 claws and remove the tonneau cover holder cap.

  12. REMOVE REAR SEAT COVER CAP (except Face to Face Seat Type)

    A0155W0E01

    Tech Tips

    Use the same procedure to remove the rear seat cover cap on the other side.


    1. Using a screwdriver, detach the 3 claws and remove the rear seat cover cap.

      Tech Tips

      Tape the screwdriver tip before use.

  13. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

    A0157OV

    Tech Tips

    When removing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. A0158A5

      Detach the 3 claws and remove the cover.

    2. A015CT4

      Remove the bolt and rear No. 1 seat belt anchor.

    3. A0156NH

      w/ Rear No. 2 Seat, except Face to Face Seat Type:

      Remove the bolt and rear No. 2 seat belt anchor.

    4. w/ Rear No. 2 Seat, except Face to Face Seat Type:


      1. Remove the clip and bolt.

      2. Detach the 18 clips and 2 claws.

      3. w/o Rear Air Conditioning System:

        Disconnect the rear seat lock control lever cable and then remove the quarter trim panel.

      4. w/ Rear Air Conditioning System:

        Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the quarter trim panel.

        A0157GF

    5. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:


      1. Remove the clip.

      2. Detach the 18 clips and 2 claws, and remove the quarter trim panel.

        A0158HZ

    6. w/ Tonneau Cover:


      1. Remove the screw and clip.

      2. Detach the 18 clips and 2 claws, and remove the quarter trim panel.

        A015ARP

  14. REMOVE POWER OUTLET SOCKET ASSEMBLY


    1. A0157Q3

      Disengage the 4 claws and remove the power outlet socket bezel.

    2. A0155JGE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the power outlet socket assembly.

  15. REMOVE POWER OUTLET SOCKET COVER NO.2


    1. A015AE8

      Disengage the 2 claws and remove the power outlet socket cover.