VOLTAGE INVERTER INSTALLATION


  1. INSTALL VOLTAGE INVERTER


    1. Install the voltage inverter with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the connector.

  2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

    A0157OV

    Tech Tips

    When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. w/ Rear No. 2 Seat, except Face to Face Seat Type:


      1. w/o Rear Air Conditioning System:

        Connect the rear seat lock control lever cable.

      2. w/ Rear Air Conditioning System:

        Connect the thermistor connector and rear seat lock control lever cable.

      3. Attach the 18 clips and 2 claws to install the quarter trim panel.

      4. Install the clip and bolt.

        Torque:
        12 N*m  { 122 kgf*cm, 9 ft.*lbf }
        A0157GF

    2. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:


      1. Attach the 18 clips and 2 claws to install the quarter trim panel.

      2. Install the clip.

        A0158HZ
    3. A0156NHE02

      w/ Rear No. 2 Seat, except Face to Face Seat Type:

      Install the rear No. 2 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.

    4. A015CT4

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    5. A0158A5

      Attach the 3 claws to install the cover.

  3. INSTALL REAR SEAT COVER CAP (except Face to Face Seat Type)

    A015E2E

    Tech Tips

    Use the same procedure to install the rear seat cover cap on the other side.


    1. Attach the 3 claws to install the rear seat cover cap.

  4. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    A015BES

    1. Attach the 6 clips to install the support plate.

  5. INSTALL REAR DOOR SCUFF PLATE LH

    A015BJQ

    1. Attach the 3 claws and 4 clips to install the scuff plate.

    2. Install the screw.

  6. INSTALL REAR STEP COVER

    A0159DZ

    Tech Tips

    Use the same procedure to install the step cover on the other side.


    1. Attach the 2 claws to install the step cover.

  7. INSTALL REAR NO. 2 SEAT ASSEMBLY (for Face to Face Seat Type)

    Install the rear No. 2 seat assembly Click here.

  8. INSTALL REAR NO. 2 SEAT ASSEMBLY (except Face to Face Seat Type)

    Install the rear No. 2 seat assembly Click here.