VOLTAGE INVERTER REMOVAL

REMOVE REAR NO. 2 SEAT ASSEMBLY (except Face to Face Seat Type)

Remove the rear No. 2 seat assembly Click here.
REMOVE REAR NO. 2 SEAT ASSEMBLY (for Face to Face Seat Type)

Remove the rear No. 2 seat assembly Click here.
REMOVE REAR STEP COVER
Tech Tips

Use the same procedure to remove the step cover on the other side.
1. Detach the 2 claws and remove the step cover.
REMOVE REAR DOOR SCUFF PLATE LH
1. Remove the screw.
2. Detach the 3 claws and 4 clips, and remove the scuff plate.
REMOVE REAR FLOOR MAT REAR SUPPORT PLATE
1. Detach the 6 clips and remove the support plate.
REMOVE REAR SEAT COVER CAP (except Face to Face Seat Type)
Tech Tips

Use the same procedure to remove the rear seat cover cap on the other side.
1. Using a screwdriver, detach the 3 claws and remove the rear seat cover cap.
  
  Tech Tips
  
  Tape the screwdriver tip before use.
REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH
Tech Tips

When removing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.
1. Detach the 3 claws and remove the cover.
2. Remove the bolt and rear No. 1 seat belt anchor.
3. w/ Rear No. 2 Seat, except Face to Face Seat Type:
  
  Remove the bolt and rear No. 2 seat belt anchor.
4. w/ Rear No. 2 Seat, except Face to Face Seat Type:
  1. Remove the clip and bolt.
  2. Detach the 18 clips and 2 claws.
  3. w/o Rear Air Conditioning System:
    
    Disconnect the rear seat lock control lever cable and then remove the quarter trim panel.
  4. w/ Rear Air Conditioning System:
    
    Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the quarter trim panel.
5. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:
  1. Remove the clip.
  2. Detach the 18 clips and 2 claws, and remove the quarter trim panel.
REMOVE VOLTAGE INVERTER
1. Disconnect the connector.
2. Remove the 2 bolts and voltage inverter.