Click here

RELAY (for Magnet Clutch Control) ON-VEHICLE INSPECTION

Click here
Click here Click here
  1. Click here

    REMOVE MAGNET CLUTCH RELAY


    1. Remove the magnet clutch relay from the engine room relay block.

  2. Click here

    INSPECT MAGNET CLUTCH RELAY


    1. Measure the resistance of the magnet clutch relay.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminal 1 and 2 Below 1 Ω

      • If the result is not as specified, replace the relay.

  3. Click here

    INSTALL MAGNET CLUTCH RELAY


    1. Install the magnet clutch relay to the engine room relay block.