Click here

RELAY (w/ Viscous Heater) ON-VEHICLE INSPECTION

Click here
Click here Click here
  1. Click here

    REMOVE VISCOUS HEATER RELAY


    1. Remove the viscous heater relay from the engine room relay block.

  2. Click here

    INSPECT VISCOUS HEATER RELAY


    1. Measure the resistance of the viscous heater relay.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminal 1 and 2 Below 1 Ω

      • If the result is not as specified, replace the relay.

  3. Click here

    INSTALL VISCOUS HEATER RELAY


    1. Install the viscous heater relay to the engine room relay block.