Click here

REAR AIR CONDITIONING PANEL REASSEMBLY

Click here
Click here Click here
  1. Click here

    INSTALL CENTER CLUSTER MODULE LENS


    1. A01569VE01

      Remove the double-sided tape from the control knob sub-assembly.

      Table 1. Text in Illustration
      *1 Double-sided Tape

    2. Wipe off any tape adhesive residue with cleaner.

    3. Remove the peeling paper from a new center cluster module lens.

      Tip:

      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    4. Install the center cluster module lens.

      Note:

      Do not reuse the center cluster module lens after removing it.

  2. Click here

    INSTALL HEATER CONTROL KNOB


    1. A0156WN

      Attach the 8 claws to install the heater control knob.

  3. Click here

    INSTALL HEATER CONTROL GUARD


    1. A0157AGE01

      Install a new heater control guard.

      Table 2. Text in Illustration
      *1 Heater Control Guard
  4. Click here

    INSTALL CENTER CLUSTER MODULE CIRCUIT

    Note:

    As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.


    1. A0159Q1

      Install the center cluster module circuit with the 2 screws.

  5. Click here

    INSTALL LOWER HEATER CONTROL BASE

    Note:

    As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.


    1. A015C84

      Install the 3 screws.

    2. A015CHM

      Attach the 6 claws to install the lower heater control base.