CLOCK REMOVAL

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

    A015A0J

    1. Detach the 8 claws and remove the opening cover.

  2. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    A0157IUE02
    Text in Illustration
    *1 Protective Tape

    1. Place protective tape as shown in the illustration.

    2. Using a moulding remover, detach the 6 claws.

    3. Disconnect the connector and remove the No. 3 instrument panel register.

  3. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    A015DBME02
    Text in Illustration
    *1 Protective Tape

    1. Place protective tape as shown in the illustration.

    2. Using a moulding remover, detach the 6 claws.

    3. Disconnect the connector and remove the No. 4 instrument panel register.

  4. REMOVE NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL

    A015D19

    1. Detach the 10 claws.

    2. Disconnect the connector and remove the No. 1 center instrument cluster finish panel.

  5. REMOVE CLOCK ASSEMBLY


    1. A0157RL

      Remove the 2 screws and clock.

  6. REMOVE RADIO RECEIVER ASSEMBLY (w/o Multi-display)


    1. A0159JG

      Remove the 2 screws and 2 bolts.

    2. A015CIR

      Pull the radio receiver to detach the 10 claws on the backside of the radio receiver.

    3. Disconnect the connectors and remove the radio receiver.

  7. REMOVE NO. 2 RADIO BRACKET (w/o Multi-display)


    1. A0157P0

      Remove the 3 bolts and bracket.

  8. REMOVE NO. 1 RADIO BRACKET (w/o Multi-display)


    1. A015BD3

      Remove the 3 bolts and bracket.

  9. REMOVE CLOCK ASSEMBLY (w/o Multi-display)


    1. A01574D

      Remove the 2 screws and clock.