Click here

IGNITION KEY CYLINDER LIGHT INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    INSTALL TRANSPONDER KEY AMPLIFIER


    1. A015CC2

      Connect the connector.

    2. Align the claw of the transponder key amplifier with the upper bracket.

    3. Push in the transponder key amplifier and install it to the upper bracket.

      Note:

      Do not push in the transponder key amplifier with excessive force as it may be damaged.

  2. Click here

    INSTALL UPPER STEERING COLUMN COVER


    1. A015A4N

      Attach the claw to install the upper steering column cover.

    2. Attach the 4 clips to install the upper steering column cover onto the instrument cluster finish panel.

  3. Click here

    INSTALL LOWER STEERING COLUMN COVER


    1. A0158ZO

      Attach the 2 claws to install the lower steering column cover.

      Note:

      Do not damage the tilt and telescopic switch.

    2. Install the 3 screws.

      2.0 N*m 20 kgf*cm 18 in.*lbf