ENGINE HOOD COURTESY SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for LHD and RHD vehicles.

  • The procedures listed below is for LHD vehicles.


  1. INSTALL HOOD LOCK ASSEMBLY


    1. A015CQDE01

      Apply MP grease to the sliding areas of the lock.

    2. A015BO7

      Connect the hood lock control cable.

    3. A015BJ9

      Connect the connector.

    4. Install the hood lock with the 2 bolts and nut.

      Torque:
      5.5 N*m  { 57 kgf*cm, 49 in.*lbf }

    5. Install a new hood lock nut cap.

  2. INSTALL HOOD LOCK CONTROL CABLE COVER

    A015DNJ

    1. Attach the claw to install the cover.

    2. Install the 3 screws.

  3. INSTALL RADIATOR GRILLE


    1. w/ Wide View Front Monitor System:


      1. Connect the connector.

    2. Attach the 2 clips and 8 claws to install the radiator grille assembly.

    3. Install the 3 screws.

  4. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here