ENGINE HOOD COURTESY SWITCH INSPECTION


  1. INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)


    1. for Engine Hood Courtesy Switch Connector 2 Pin Type (for LHD Vehicle):

      A01599IE02

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Unlock 10 kΩ or higher
        1 - 2 Lock Below 1 Ω

        If the result is not as specified, replace the hood lock assembly.

    2. for Engine Hood Courtesy Switch Connector 2 Pin Type (for RHD Vehicle):

      A015D4WE02

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Unlock 10 kΩ or higher
        1 - 2 Lock Below 1 Ω

        If the result is not as specified, replace the hood lock assembly.

    3. for Engine Hood Courtesy Switch Connector 4 Pin Type:

      A0157PVE03

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 3 Always Below 1 Ω
        2 - 4 Unlock 10 kΩ or higher
        2 - 4 Lock Below 1 Ω

        If the result is not as specified, replace the hood lock assembly.