METER / GAUGE SYSTEM SYSTEM DESCRIPTION


  1. METER GAUGE AND WARNING/INDICATOR (w/o Multi-information Display)

    A015C34E01
    Meter/Gauge
    Item Details
    Speedometer Based on a signal received from the wheel speed sensor, the skid control ECU calculates the vehicle speed and transmits data to the combination meter (CAN).
    Tachometer The combination meter receives a speed signal from the ECM, and the gauge needle operates (CAN).
    ODO/TRIP meter

    • The combination meter receives a vehicle speed pulse integration signal from the skid control ECU, and the ODO/TRIP meter display operates. (CAN)

    • Using the trip meter reset knob, the ODO/TRIP meter display changes.
    Fuel receiver gauge The combination meter receives fuel amount information measured by the fuel sender gauge, and the gauge needle operates (Direct line).
    Engine coolant temperature gauge The combination meter receives an engine coolant temperature signal from the ECM, and the gauge needle operates (CAN).
    Oil pressure receiver gauge The combination meter receives an engine speed signal from the ECM (CAN), and receives an oil pressure sender signal from the oil pressure sender (Direct line). Then the meter measures signals and the gauge needle operates.
    Voltage meter Monitors IG voltage and the gauge needle operates (Direct line).
    Warning/Indicator
    Item Details

    BEAM indicator light

    A015926     		Receives signals from the main body ECU (CAN).

    FRONT FOG indicator light

    A0158C7     		The indicator turns on when a FRONT FOG illumination command signal is received (CAN).

    REAR FOG indicator light*1

    A015E0L     		The indicator turns on when a REAR FOG illumination command signal is received (CAN).

    A/T OIL TEMP warning light*2

    A0157YQ     		Warning is displayed when the oil temperature is high (CAN).

    A/T P warning light*2

    A015DHQ     		The indicator turns on when a shift position P signal or transfer neutral switch signal are received (CAN).

    SRS warning light

    A015DSA     		Receives malfunction signals from the center airbag sensor (CAN).

    KEY indicator light*4

    A01575Q     		The indicator turns on when a key not in cabin warning signal is received (CAN).

    DOOR warning light

    A0156D0     		The open door indicator comes on when a signal is received from the main body ECU (CAN).

    TIRE CARRIER warning light*3

    A0155NN     		The indicator turns on based on the TIRE CARRIER illumination command signal (Direct line).

    Driver side seat belt warning light

    A015DLU     		Receives driver seat belt signals (Unfastened) from the main body ECU (CAN).

    Brake warning light

    A0159DR

    • Comes on when the parking brake switch is ON (CAN).

    • Brake fluid level warning switch is ON (Direct line).

    • Vehicle stability control system is malfunctioning.

    CHARGE warning light

    A015E3P     		Receives malfunction signals from the generator (Direct line).

    4LO indicator light

    A015C9C     		Receives 4LO indicator signals from the four wheel drive control ECU (CAN).

    ABS warning light

    A015ALS     		Receives malfunction signals from the skid control ECU (CAN).

    MIL

    A0157WX     		Receives malfunction signals from the ECM (Direct line).

    GLOW indicator light*5

    A015E19     		The indicator turns on when a GLOW indicator signal is received (CAN).

    OIL LEVEL indicator light

    A015DBI     		The indicator turns on when an oil level signal is received (Direct line).

    FUEL warning light

    A015DEN     		Receives fuel empty signals from the fuel sender gauge (Direct line).

    FUEL FILTER & SEDIMENTER indicator light*5

    A015849     		The indicator turns on when a fuel filter clogged malfunction signal is received, or blinks when a fuel sedimenter malfunction signal is received (Direct line).

    SLIP indicator light*6

    A0159WY     		Receives malfunction signals from the skid control ECU (CAN).

    VSC OFF indicator light*6

    A015CGR     		The VSC OFF indicator turns on when a VSC warning signal is received (CAN).

    Cruise control indicator light*11

    A0158TI     		Receives a cruise control on signal or malfunction signal from the ECM (CAN).

    Turn signal indicator light (LH/RH)

    A015B40     		Receives a turn signal from the FLASHER relay (Direct line).

    WASHER indicator light

    A01560W     		The indicator turns on when a washer fluid level signal is received (Direct line).

    RSCA OFF indicator light*7

    A0158QZ     		Receives an RSCA OFF signal from the center airbag sensor (Direct line).

    CRAWL indicator light*6

    A015CF9     		Receives a CRAWL switch ON signal from the skid control ECU (CAN).

    ECT PWR indicator light*2

    A01598Q     		Receives an ECT PWR switch ON signal from the ECM (CAN).

    2nd START indicator light*2

    A0155XM     		Receives a 2nd START switch ON signal from the ECM (CAN).

    CENTER differential lock indicator light

    A0159KH     		Receives a center differential lock switch ON signal from the four wheel drive control ECU (CAN).

    REAR differential lock warning light

    A0155XK     		The indicator turns on when a REAR differential lock indicator signal is received (CAN).

    SPEED LIMIT indicator light

    A015CSD     		The indicator turns on when a vehicle speed signal is received (CAN).

    Eco driving indicator light

    A015744     		Receives the signals necessary for operation from the ECM and the skid control ECU (CAN).

    SET indicator light*11

    A0158MA     		The indicator turns on when a SET indicator signal is received (CAN).

    TRC OFF indicator light*6

    A015CAO     		Receives a TRC OFF indicator light signal from the skid control ECU (CAN).

    Turn assist indicator light*6

    A015BJ0     		Receives a turn assist indicator light signal from the skid control ECU (CAN).

    Multi-terrain select indicator light*10

    A01594X     		Receives a multi-terrain select indicator light signal from the skid control ECU (CAN).
    A/T P shift position indicator*2 Receives a P signal from the ECM (CAN).
    A/T R shift position indicator*2 Receives an R signal from the ECM (CAN).
    A/T N shift position indicator*2 Receives an N signal from the ECM (CAN).
    A/T D shift position indicator*2 Receives a D signal from the ECM (CAN).
    A/T S (1 to 5) shift position indicator*8 Receives a (1 to 5) signal from the ECM (CAN).
    A/T S (1 to 6) shift position indicator*9 Receives a (1 to 6) signal from the ECM (CAN).

    • *1: w/ Rear Fog Light

    • *2: for Automatic Transmission

    • *3: w/ Tire Carrier

    • *4: w/ Entry and Start System

    • *5: for 1VD-FTV

    • *6: w/ VSC

    • *7: w/ Curtain Shield Airbag

    • *8: for A750F Automatic Transmission

    • *9: for AB60F Automatic Transmission

    • *10: w/ Multi-terrain Select

    • *11: w/ Cruise Control System

  2. METER GAUGE AND WARNING/INDICATOR (w/ Multi-information Display)

    A015BKAE01
    Meter/Gauge
    Item Details
    Speedometer Based on a signal received from the wheel speed sensor, the skid control ECU calculates the vehicle speed and transmits data to the combination meter (CAN).
    Tachometer The combination meter receives a speed signal from the ECM, and the gauge needle operates (CAN).
    ODO/TRIP meter

    • The combination meter receives a vehicle speed pulse integration signal from the skid control ECU, and the ODO/TRIP meter display operates. (CAN)

    • Using the trip meter reset knob, the ODO/TRIP meter display changes.
    Fuel receiver gauge The combination meter receives fuel amount information measured by the fuel sender gauge, and the gauge needle operates (Direct line).
    Engine coolant temperature gauge The combination meter receives an engine coolant temperature signal from the ECM, and the gauge needle operates (CAN).
    Oil pressure receiver gauge The combination meter receives an engine speed signal from the ECM (CAN), and receives an oil pressure sender signal from the oil pressure sender (Direct line). Then the meter measures signals and the gauge needle operates.
    Voltage meter Monitors IG voltage and the gauge needle operates (Direct line).
    Warning/Indicator
    Item Details

    BEAM indicator light

    A015926     		Receives signals from the main body ECU (CAN).

    FRONT FOG indicator light

    A0158C7     		The indicator turns on when a FRONT FOG light illumination signal is received (CAN).

    TAIL LIGHT indicator light

    A0156OU     		The indicator turns on when a taillight illumination signal is received (CAN).

    REAR FOG indicator light*1

    A015E0L     		The indicator turns on when a REAR FOG light illumination signal is received (CAN).

    A/T P warning light

    A015DHQ     		The indicator turns on when a shift position P signal or transfer neutral switch signal are received (CAN).

    SRS warning light

    A015DSA     		Receives malfunction signals from the center airbag sensor (CAN).

    DOOR warning light

    A0156D0     		The open door indicator comes on when a signal is received from the main body ECU (CAN).

    TIRE CARRIER warning light*2

    A0155NN     		The indicator turns on based on the TIRE CARRIER illumination command signal (Direct line).

    Driver side seat belt warning light

    A015DLU     		Receives driver seat belt signals (Unfastened) from the main body ECU (CAN).

    Brake warning light

    A0159DR

    • Comes on when the parking brake switch is ON (CAN).

    • Brake fluid level warning switch is ON (Direct line).

    • Vehicle stability control system is malfunctioning.

    CHARGE warning light

    A015E3P     		Receives malfunction signals from the generator (Direct line).

    4LO indicator light

    A015C9C     		Receives 4LO indicator light signal from the four wheel drive control ECU (CAN).

    ABS warning light

    A015ALS     		Receives malfunction signals from the skid control ECU (CAN).

    MIL

    A0157WX     		Receives malfunction signals from the ECM (Direct line).

    GLOW indicator light*3

    A015E19     		The indicator turns on when a GLOW indicator signal is received (CAN).

    FUEL warning light

    A015DEN     		Receives fuel empty signals from the fuel sender gauge (Direct line).

    SLIP indicator light

    A0159WY     		Receives malfunction signals from the skid control ECU (CAN).

    Cruise control indicator light*12

    A0158TI     		Receives a cruise control on signal or malfunction signal from the ECM (CAN).

    Turn signal indicator light (LH/RH)

    A015B40     		Receives a turn signal from the FLASHER relay (Direct line).

    RSCA OFF indicator light*4

    A0158QZ     		Receives an RSCA OFF signal from the center airbag sensor (Direct line).

    Master warning light

    A01564G     		Receives a warning signal from each sensor and ECU (Direct line and CAN).

    CRAWL indicator light

    A015CF9     		Receives a CRAWL switch ON signal from the skid control ECU (CAN).

    ECT PWR indicator light

    A01598Q     		Receives an ECT PWR switch ON signal from the ECM (CAN).

    2nd START indicator light

    A0155XM     		Receives a 2nd START switch ON signal from the ECM (CAN).

    Center Differential Lock indicator light

    A0159KH     		Receives a center differential lock switch ON signal from the four wheel drive control ECU (CAN).

    Rear Differential Lock warning light*5

    A0155XK     		The indicator turns on when a REAR differential lock indicator signal is received (CAN).

    SPEED LIMIT indicator light

    A015CSD     		The indicator turns on when a vehicle speed signal is received (CAN).

    PCS indicator light*6

    A015CH1     		Receives a PCS indicator light signal from the seat belt control ECU (CAN).

    Power steering warning light

    A015AIU     		Receives a power steering warning light signal from the power steering ECU (CAN).

    VSC OFF indicator light

    A015CGR     		Receives a VSC OFF indicator light signal from the skid control ECU (CAN).

    Eco driving indicator light

    A015744     		Receives the signals necessary for operation from the ECM and the skid control ECU (CAN).

    SET indicator light*12

    A0158MA     		The indicator turns on when a SET indicator signal is received (CAN).

    Radar cruise control indicator light*9

    A01581C     		The indicator turns on when a radar cruise control indicator signal is received (CAN).

    Turn assist indicator light

    A015BJ0     		Receives a turn assist indicator light signal from the skid control ECU (CAN).

    Multi-terrain select indicator light*13

    A01594X     		Receives a multi-terrain select indicator light signal from the skid control ECU (CAN).

    Headlight beam level control system warning light

    A015DHG

    • Receives a headlight beam level control system warning light signal from the headlight leveling ECU (Direct line).*10

    • Receives a headlight beam level control system warning light signal from the headlight swivel ECU (CAN).*11

    Automatic high beam indicator light*14

    A015CPH     		Receives automatic high beam indicator signals from the main body ECU (CAN).
    A/T P shift position indicator Receives a P signal from the ECM (CAN).
    A/T R shift position indicator Receives an R signal from the ECM (CAN).
    A/T N shift position indicator Receives an N signal from the ECM (CAN).
    A/T D shift position indicator Receives a D signal from the ECM (CAN).
    A/T S (1 to 5) shift position indicator*7 Receives a (1 to 5) signal from the ECM (CAN).
    A/T S (1 to 6) shift position indicator*8 Receives a (1 to 6) signal from the ECM (CAN).

    • *1: w/ Rear Fog Light

    • *2: w/ Tire Carrier

    • *3: for 1VD-FTV

    • *4: w/ Curtain Shield Airbag

    • *5: w/ Rear Differential Lock

    • *6: w/ Pre-crash Safety System

    • *7: for A750F Automatic Transmission

    • *8: for AB60F Automatic Transmission

    • *9: w/ Dynamic Radar Cruise Control System

    • *10: w/ Static Headlight Auto Leveling

    • *11: w/ Dynamic Headlight Auto Leveling

    • *12: w/ Cruise Control System

    • *13: w/ Multi-terrain Select

    • *14: w/ Automatic High Beam System

  3. MULTI-INFORMATION DISPLAY (w/ Multi-information Display)

    When the DISP switch is pressed, the multi-information display is changed between the following: cruise information display and warning display.


    1. Basic Flowchart.

      A015DNDE03

  4. ECO DRIVING INDICATOR LIGHT SETTING

    Tech Tips


    • The eco driving indicator light can be deactivated by changing the setting.

    • When the eco driving indicator light is deactivated, the indicator and warning light check is not performed.


    1. Setting eco driving indicator light.


      1. Display the odometer screen.

      2. Press and hold the ODO/TRIP switch for five seconds or more to display the settings screen.

      3. w/o Multi-information Display:

        After selecting "Eco On" or "EcoOFF", press and hold the ODO/TRIP switch for 2 seconds or more to exit the settings screen.

      4. w/ Multi-information Display:

        After selecting "ON" or "OFF", press and hold the ODO/TRIP switch for 2 seconds or more to exit the settings screen.