METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the Intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting.

    5. Select the setting by referring to the table below.

      Warning
      Display (Item) Default Contents Setting
      Driver Side Seatbelt Warning Buzzer ON To change the seat-belt warning buzzer. ON / OFF
      Front Passenger Side Seatbelt Warning Buzzer ON To change the seat-belt warning buzzer. ON / OFF
      Unit Conversion
      Display (Item) Default Contents Setting
      Units By Region Different for each vehicle To change the units of the display. Km/l JP / Km/l / Ml/g US / Ml/g UK
      Display
      Display (Item) Default Contents Setting
      Eco Drive Indicator Zone ON To change the eco driving indicator zone display. ON / OFF
      Language None To change the language of the display. Eng US / Eng UK / French / German / Spanish / Italian / Japanes / CHN Sim / CHN Trd