ELECTRICAL KEY OSCILLATOR (for Outside Luggage Compartment) REMOVAL


  1. REMOVE PINTLE HOOK ASSEMBLY (w/ Pintle Hook)


    1. Remove the pintle hook assembly Click here.

  2. REMOVE SPARE WHEEL CARRIER SUB-ASSEMBLY (w/ Tire Carrier)


    1. Remove the spare wheel carrier sub-assembly Click here.

  3. REMOVE REAR QUARTER PANEL MUDGUARD LH

    A015AKK

    1. Remove the clip.

    2. Using a T30 "TORX" socket, remove the 6 screws and mudguard.

  4. REMOVE REAR QUARTER PANEL MUDGUARD RH

    A015DUK

    1. Remove the clip.

    2. Using a T30 "TORX" socket, remove the 7 screws and mudguard.

  5. REMOVE REAR NO. 1 BUMPER PLATE


    1. Put protective tape around the rear No. 1 bumper plate.

    2. Detach the 20 claws and remove the rear No. 1 bumper plate.

      A015DCRE02
      Text in Illustration
      *1 Protective Tape - -

  6. REMOVE REAR BUMPER COVER

    Tech Tips

    For the rear bumper cover with tire carrier, use the procedures described below.


    1. Put protective tape around the rear bumper cover.

      A015BE3E01
      Text in Illustration
      *1 Protective Tape - -

    2. Open the tail gate and remove the 4 clips.

      A0155G1

    3. Close the tail gate.

    4. Remove the 7 bolts, 6 screws and 2 clips.

    5. Detach the 14 claws and remove the rear bumper cover.

      A0159KF

    6. w/ TOYOTA Parking Assist-sensor System or w/ Rear Fog Light:

      Disconnect the No. 2 frame wire connector.

  7. REMOVE REAR BUMPER ARM BRACKET LH


    1. A0157YD

      Disconnect the connector.

    2. Remove the 2 bolts and rear bumper arm bracket LH.

  8. REMOVE ELECTRICAL KEY ANTENNA


    1. A015675

      Remove the 2 screws and antenna.