Click here

DOOR CONTROL RELAY (for RHD) INSTALLATION

Click here
Click here Click here
Tip:

A bolt without a torque specification is shown in the standard bolt chart (Click here).

Click here
  1. Click here

    INSTALL DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY


    1. Install the double lock door control relay assembly with the bolt.

    2. Connect the connector.

  2. Click here

    INSTALL STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column)

    (Click here)

  3. Click here

    INSTALL STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column)

    (Click here)

  4. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  5. Click here

    CHECK SRS WARNING LIGHT

    (Click here)