Click here

BACK DOOR LOCK REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE CENTER BACK DOOR GARNISH


    1. A015C1G

      Detach the 5 clips and 4 claws, and remove the center back door garnish.

  2. Click here

    REMOVE BACK DOOR SIDE GARNISH LH


    1. A015931

      Detach the 3 clips and 2 claws, and remove the back door side garnish LH.

  3. Click here

    REMOVE BACK DOOR SIDE GARNISH RH


    1. w/o Power Back Door:

      Tip:

      Use the same procedure described for the LH side.

    2. A0159ZC

      w/ Power Back Door:


      1. Detach the clip and 4 claws, and remove the back door side garnish RH.

  4. Click here

    REMOVE ASSIST GRIP (for Face to Face Seat Type)


    1. A015CXW

      Remove the 2 screws and assist grip.

  5. Click here

    REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)


    1. A0155CR

      Using a screwdriver, detach the 4 claws and remove the No. 2 back door service hole cover.

    2. Disconnect connector.

  6. Click here

    REMOVE DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)


    1. A015CF4

      Detach the 2 claws and remove the door opening switch sub-assembly.

  7. Click here

    REMOVE BACK DOOR GARNISH


    1. A0157HD

      Using a screwdriver, detach the 14 clips and remove the back door garnish.

      Tip:

      Tape the screwdriver tip before use.

  8. Click here

    REMOVE REAR ASSIST GRIP REINFORCEMENT (for Face to Face Seat Type)


    1. A0158CK

      Remove the 3 bolts.

    2. Detach the 2 claws and remove the rear assist grip reinforcement.

  9. Click here

    REMOVE BACK DOOR LOCK COVER


    1. A015ACF

      Detach the 4 claws and remove the back door lock cover.

  10. Click here

    REMOVE BACK DOOR LOCK ASSEMBLY


    1. A0157QP

      w/o Power Back Door:


      1. Disconnect the connector.

      2. Remove the 3 bolts and back door lock assembly.

    2. A0155D5

      w/ Power Back Door:


      1. Disconnect the connector.

      2. Detach the guide.

      3. Remove the 4 bolts and back door lock assembly.

  11. Click here

    REMOVE BACK DOOR LOCK PROTECTOR (w/ Power Back Door)


    1. A015CBCE01

      Remove the screw.

    2. Detach the 7 claws, and remove the protector (B).

      Table 1. Text in Illustration
      *1 Protector (B)
    3. A0158L7E01

      Detach the 2 claws, and remove the protector (A).

      Table 2. Text in Illustration
      *1 Protector (A)