TRANSMITTER BATTERY (w/ Entry and Start System) REPLACEMENT


  1. REMOVE TRANSMITTER BATTERY

    Note

    Take extra care when handling these precision electronic components.


    1. Push (for type A, for type B) or slide (for type C) the release hook knob and extract the emergency key.

      A015AAIE01
      Text in Illustration
      *A for Type A, for Type B *B for Type C

    2. Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      A0158QOE01
      Text in Illustration
      *A for Type A, for Type B *B for Type C
      *1 Protective Tape - -

      Tech Tips

      Tape the screwdriver tip before use.

    3. Remove the battery.

      A015716E01
      Text in Illustration
      *A for Type A (lithium battery: CR1632) *B for Type B (lithium battery: CR1632)
      *C for Type C (lithium battery: CR2032) - -

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      • Do not push the terminals with your finger.

      • Do not forcibly pry up the battery. The terminals may be damaged.

      • Do not touch the battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

  2. INSTALL TRANSMITTER BATTERY


    1. Install a new battery with the positive (+) side facing upward as shown in the illustration.

      A0155VJE01
      Text in Illustration
      *A for Type A (lithium battery: CR1632) *B for Type B (lithium battery: CR1632)
      *C for Type C (lithium battery: CR2032) - -

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      • Do not bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

    2. Install the transmitter housing cover by pressing down on it as shown in the illustration.

      A015ASHE01
      Text in Illustration
      *A for Type A, for Type B *B for Type C

    3. Insert the mechanical key into the transmitter.

      A0157S7E01
      Text in Illustration
      *A for Type A, for Type B *B for Type C

    4. Press one of the transmitter switches and check that the LED illuminates.