WIRELESS DOOR LOCK BUZZER INSTALLATION

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. INSTALL WIRELESS DOOR LOCK BUZZER


    1. A015CFZ

      Connect the connector.

    2. Attach the clamp to install the buzzer.

  2. INSTALL FRONT BUMPER COVER

    Tech Tips

    For the front bumper cover with garnish, use the procedure described below.


    1. A015BCT

      w/ Headlight Cleaner System:

      Connect the headlight cleaner hose.

    2. w/ TOYOTA Parking Assist-sensor System or w/ Fog Light:

      Connect the No. 4 engine room wire connector.

    3. Attach the 10 claws to install the front bumper cover.

    4. Install the 3 clips, 4 screws and 4 bolts.

    5. Using a T30 "TORX" socket, install the 6 screws.

  3. INSTALL RADIATOR GRILLE ASSEMBLY


    1. w/ Wide View Front Monitor System:


      1. Connect the connector.

    2. Attach the 2 clips and 8 claws to install the radiator grille assembly.

    3. Install the 3 screws.

  4. INSTALL UPPER RADIATOR SUPPORT SEAL


    1. Install the radiator support seal with the 7 clips.

      A015BVKE02

  5. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH


    1. Push in the clip to install the front fender splash shield sub-assembly LH.

    2. Install the 3 bolts and screw.

  6. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH


    1. Push in the clip to install the front fender splash shield sub-assembly RH.

    2. Install the 3 bolts and 2 screws.