WIRELESS DOOR LOCK BUZZER REMOVAL

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH


    1. A01588F

      Remove the 3 bolts and screw.

    2. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH


    1. A0159SG

      Remove the 3 bolts and 2 screws.

    2. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.

  3. REMOVE UPPER RADIATOR SUPPORT SEAL


    1. Remove the 7 clips and radiator support seal.

      A015BVKE02

  4. REMOVE RADIATOR GRILLE ASSEMBLY


    1. A0157G3E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the radiator grille assembly.

    2. Remove the 3 screws.

    3. Detach the 2 clips and 8 claws, and remove the radiator grille assembly.

    4. w/ Wide View Front Monitor System:


      1. Disconnect the connector.

  5. REMOVE FRONT BUMPER COVER

    Tech Tips

    For the front bumper cover with garnish, use the procedure described below.


    1. Put protective tape around the front bumper cover.

      A0155QIE01
      Text in Illustration
      *1 Protective Tape - -

    2. Using a T30 "TORX" socket, remove the 6 screws.

      A015DGIE01
      Text in Illustration
      *A LH Side *B RH Side

    3. Remove the 3 clips, 4 screws and 4 bolts.

    4. Detach the 10 claws and remove the front bumper cover.

      A0158BY

    5. w/ TOYOTA Parking Assist-sensor System or w/ Fog Light:

      Disconnect the No. 4 engine room wire connector and remove the front bumper cover.

    6. A0159AB

      w/ Headlight Cleaner System:

      Disconnect the headlight cleaner hose and remove the front bumper cover.

  6. REMOVE WIRELESS DOOR LOCK BUZZER


    1. A015CFZ

      Disconnect the connector.

    2. Detach the clamp and remove the buzzer.