Click here

DOOR CONTROL RECEIVER INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL DOOR CONTROL RECEIVER


    1. A015D61

      Install the receiver with the bolt.

      15 N*m 153 kgf*cm 11 ft.*lbf

    2. Connect the connector.

  2. Click here

    INSTALL REAR UPPER PILLAR GARNISH RH


    1. w/o Power Back Door:


      1. Attach the 5 clips to install the rear upper pillar garnish.

    2. A0158LGE02

      w/ Power Back Door:


      1. Pass the power back door rod through the rear upper pillar garnish.

      2. Attach the 5 clips to install the rear upper pillar garnish.

    3. A0159LR

      Install the seat belt shoulder anchor with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf
    4. A015BZS

      Attach the 2 claws to close the seat belt shoulder anchor cover.

  3. Click here

    INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Tip:

    When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. w/ Rear No. 2 Seat, except Face to Face Seat Type:


      1. w/o Rear Air Conditioning System:

        Connect the rear seat lock control lever cable.

      2. w/ Rear Air Conditioning System:

        Connect the thermistor connector and rear seat lock control lever cable.

      3. Attach the 16 clips and 2 claws to install the quarter trim panel.

      4. A0156CN

        Install the clip and bolt.

        12 N*m 122 kgf*cm 9 ft.*lbf

    2. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:


      1. Attach the 16 clips and 2 claws to install the quarter trim panel.

      2. A0157MJ

        Install the clip.

    3. A015C42

      w/ Rear No. 2 Seat, except Face to Face Seat Type:


      1. Install the rear No. 2 seat belt anchor with the bolt.

        42 N*m 428 kgf*cm 31 ft.*lbf
      2. A015DRR

        Attach the 3 claws to install the cover.

    4. A015CPR

      Install the rear No. 1 seat belt anchor with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf
    5. A0157CJ

      Attach the 3 claws to install the cover.

  4. Click here

    INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

    Tip:

    Use the same procedure to install the rear seat cover cap on the other side.


    1. Attach the 3 claws to install the rear seat cover cap.

  5. Click here

    INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

    Tip:

    Use the same procedure to install the tonneau cover holder cap on the other side.


    1. Attach the 2 claws to install the tonneau cover holder cap.

  6. Click here

    INSTALL REAR FLOOR MAT REAR SUPPORT PLATE


    1. Attach the 6 clips to install the support plate.

  7. Click here

    INSTALL REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedures described for the LH side.

  8. Click here

    INSTALL REAR STEP COVER

    Tip:

    Use the same procedure to install the step cover on the other side.


    1. Attach the 2 claws to install the step cover.

  9. Click here

    INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)


    1. Install the rear No. 2 seat assembly RH (Click here).

  10. Click here

    INSTALL REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)


    1. Install the rear No. 2 seat assembly RH (Click here).