DOOR CONTROL RECEIVER INSTALLATION


  1. INSTALL DOOR CONTROL RECEIVER


    1. A015D61

      Install the receiver with the bolt.

      Torque:
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

    2. Connect the connector.

  2. INSTALL REAR UPPER PILLAR GARNISH RH

    A0159J7

    1. w/o Power Back Door:


      1. Attach the 5 clips to install the rear upper pillar garnish.

    2. A0158LGE02

      w/ Power Back Door:


      1. Pass the power back door rod through the rear upper pillar garnish.

      2. Attach the 5 clips to install the rear upper pillar garnish.

    3. A0159LR

      Install the seat belt shoulder anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    4. A015BZS

      Attach the 2 claws to close the seat belt shoulder anchor cover.

  3. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    A015DJL

    Tech Tips

    When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. w/ Rear No. 2 Seat, except Face to Face Seat Type:


      1. w/o Rear Air Conditioning System:

        Connect the rear seat lock control lever cable.

      2. w/ Rear Air Conditioning System:

        Connect the thermistor connector and rear seat lock control lever cable.

      3. Attach the 16 clips and 2 claws to install the quarter trim panel.

      4. Install the clip and bolt.

        Torque:
        12 N*m  { 122 kgf*cm, 9 ft.*lbf }
        A0156CN

    2. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:


      1. Attach the 16 clips and 2 claws to install the quarter trim panel.

      2. Install the clip.

        A0157MJ
    3. A015C42

      w/ Rear No. 2 Seat, except Face to Face Seat Type:


      1. Install the rear No. 2 seat belt anchor with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }
      2. A015DRR

        Attach the 3 claws to install the cover.

    4. A015CPR

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    5. A0157CJ

      Attach the 3 claws to install the cover.

  4. INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

    A015E2E

    Tech Tips

    Use the same procedure to install the rear seat cover cap on the other side.


    1. Attach the 3 claws to install the rear seat cover cap.

  5. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

    A015DVZ

    Tech Tips

    Use the same procedure to install the tonneau cover holder cap on the other side.


    1. Attach the 2 claws to install the tonneau cover holder cap.

  6. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    A015BES

    1. Attach the 6 clips to install the support plate.

  7. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedures described for the LH side.

  8. INSTALL REAR STEP COVER

    A0159DZ

    Tech Tips

    Use the same procedure to install the step cover on the other side.


    1. Attach the 2 claws to install the step cover.

  9. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)


    1. Install the rear No. 2 seat assembly RH Click here.

  10. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)


    1. Install the rear No. 2 seat assembly RH Click here.