POWER DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the tester on.

    4. Enter the following menus: Select: Body / Door Lock / Utility / Customize /

    5. Select the setting by referring to the table below.

      Door Lock
      Display Default Contents Setting
      Unlock Key Twice OFF Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. If this setting is OFF, turning the driver side door key cylinder once unlocks all doors. ON/OFF

  2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Turn the ignition switch to ON.

    2. Enter the following menus: Setup / Vehicle.

    3. Select the setting by referring to the table below.

      Door lock settings
      Display Default Contents Setting
      Unlock on second key turn OFF Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. If this setting is OFF, turning the driver side door key cylinder once unlocks all doors. ON/OFF