Click here

NETWORK GATEWAY ECU (for LHD) INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL NETWORK GATEWAY ECU


    1. Install the ECU with the nut.

    2. Connect the connector.

  2. Click here

    INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


    1. Connect the connector.

    2. Attach the 3 claws to install the lower No. 2 instrument panel finish panel.

    3. Install the 4 bolts.

  3. Click here

    INSTALL INSTRUMENT PANEL BOX DOOR KNOB


    1. Attach the 2 claws to install the instrument panel box door knob.

  4. Click here

    INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. Attach the 6 claws to install the No. 3 instrument cluster finish panel garnish.

  5. Click here

    INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)


    1. A015670E01

      Connect the connector.

      Note:

      When handling the airbag connector, take care not to damage the airbag wire harness.

    2. Attach the 4 claws to install the front passenger side knee airbag.

    3. Install the 4 bolts.

      10 N*m 102 kgf*cm 7 ft.*lbf
  6. Click here

    INSTALL LOWER INSTRUMENT PANEL (w/o Passenger Side Knee Airbag)


    1. Attach the 4 claws to install the lower instrument panel.

    2. Install the 2 bolts.

  7. Click here

    INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)


    1. Attach the 4 claws to install the No. 2 instrument panel under cover.

  8. Click here

    INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. w/o Console Box Lid:


      1. Install the lower instrument panel pad sub-assembly RH (Click here).

    2. w/ Cool Box:


      1. Install the lower instrument panel pad sub-assembly RH (Click here).

    3. w/o Cool Box:


      1. Install the lower instrument panel pad sub-assembly RH (Click here).

  9. Click here

    INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. w/o Console Box Lid:


      1. Install the No. 1 instrument panel finish panel cushion (Click here).

    2. w/ Cool Box:


      1. Install the No. 1 instrument panel finish panel cushion (Click here).

    3. w/o Cool Box:


      1. Install the No. 1 instrument panel finish panel cushion (Click here).

  10. Click here

    INSTALL FRONT DOOR SCUFF PLATE RH


    1. w/ Sliding Roof:

      Install the front door scuff plate (Click here).

    2. w/o Sliding Roof:

      Install the front door scuff plate (Click here).

  11. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Passenger Side Knee Airbag)

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  12. Click here

    CHECK SRS WARNING LIGHT (w/ Passenger Side Knee Airbag)


    1. Check the SRS warning light (Click here).