PARKING ASSIST ECU (w/ Parking Assist Monitor System) INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL PARKING ASSIST ECU

    A015A2H

    1. Install the parking assist ECU to the blower unit with the 3 screws.

      Note


      • Avoid any impact to the parking assist ECU.

      • Do not drop the ECU. If it is dropped, replace it with a new one.

    2. Connect the connector.

  2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    A015C2F

    1. Attach the 4 claws to install the No. 2 instrument panel under cover.