ULTRASONIC SENSOR (for Rear) INSTALLATION

INSTALL NO. 1 ULTRASONIC SENSOR RETAINER

1. 

   Text in Illustration

   *a	Protrusion
   *b	Keyhole

   Align the keyhole and protrusion as shown in the illustration.

   Note

   
   

   • Do not damage the bumper with the protrusion when installing the No. 1 ultrasonic sensor retainer.

   • Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the rear bumper.

   Tech Tips

   The illustration shows the No. 1 ultrasonic sensor retainer for the RH corner. The vertical orientation of the No. 1 ultrasonic sensor retainers for the LH corner is opposite that of the image shown in the illustration.

2. Attach the 2 claws to install the No. 1 ultrasonic sensor retainer.

INSTALL NO. 2 ULTRASONIC SENSOR RETAINER

1. 

   Text in Illustration

   *a	Protrusion
   *b	Keyhole

   Align the keyhole and protrusion as shown in the illustration.

   Note

   
   

   • Do not damage the bumper with the protrusion when installing the No. 2 ultrasonic sensor retainer.

   • Securely install the No. 2 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the rear bumper.

2. Attach the 2 claws to install the No. 2 ultrasonic sensor retainer.

INSTALL NO. 1 ULTRASONIC SENSOR

1. Attach the 2 claws to install the No. 1 ultrasonic sensor.

   Note

   Push the ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.

INSTALL NO. 2 FRAME WIRE

1. for Standard:

   Click here.

2. w/ Towing Hitch:

   Click here.

3. w/ Pintle Hook:

   Click here.

INSTALL REAR BUMPER COVER

1. for Standard:

   Click here.

2. w/ Towing Hitch:

   Click here.

3. w/ Pintle Hook:

   Click here.