ULTRASONIC SENSOR (for Front) INSTALLATION

INSTALL NO. 2 ULTRASONIC SENSOR RETAINER
Tech Tips

Use the same procedure to install the No. 2 ultrasonic sensor retainer on the other side.
1. Text in Illustration
  
  *a Protrusion
  
  *b Keyhole
  
  Temporarily install the No. 2 ultrasonic sensor retainer to the front bumper.
  Note
  
  Do not damage the bumper with the protrusion when installing the retainer.
  
  Securely install the No. 2 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.
2. Attach the 2 claws to install the No. 2 ultra sonic sensor retainer.
INSTALL NO. 1 ULTRASONIC SENSOR

Tech Tips

Use the same procedure to install the No. 1 ultrasonic sensor on the other side.
1. Attach the 2 claws to install the ultrasonic sensor.
  
  Note
  
  Push the No. 2 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the No. 1 ultrasonic sensor.
INSTALL ULTRASONIC SENSOR CLIP
1. Attach the 4 claws to install the ultrasonic sensor clip.
  
  Note
  
  Hold the No. 1 ultrasonic sensor in place so that the No. 2 ultrasonic sensor retainer does not come out when installing the ultrasonic sensor clip.
INSTALL NO. 4 ENGINE ROOM WIRE
1. w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:
  
  Install the No. 4 engine room wire.
  1. Attach the 11 clamps to install the No. 4 engine room wire.
  2. Connect the 2 connectors.
2. w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:
  
  Install the No. 4 engine room wire.
  1. Attach the 12 clamps to install the No. 4 engine room wire.
  2. Connect the 4 connectors.
3. w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:
  
  Install the No. 4 engine room wire.
  1. Attach the 12 clamps to install the No. 4 engine room wire.
  2. Connect the 2 connectors.
INSTALL FRONT BUMPER COVER

Click here

Text in Illustration
*a	Protrusion
*b	Keyhole