Click here

ULTRASONIC SENSOR (for Front) REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE FRONT BUMPER COVER

    (Click here)

  2. Click here

    REMOVE NO. 4 ENGINE ROOM WIRE


    1. w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Remove the No. 4 engine room wire.


      1. Disconnect the 2 connectors.

      2. A015C8G

        Detach the 11 clamps and remove the No. 4 engine room wire.

    2. w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Remove the No. 4 engine room wire.


      1. Disconnect the 4 connectors.

      2. A0158EA

        Detach the 12 clamps and remove the No. 4 engine room wire.

    3. w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:

      Remove the No. 4 engine room wire.


      1. Disconnect the 2 connectors.

      2. A015E8P

        Detach the 12 clamps and remove the No. 4 engine room wire.

  3. Click here

    REMOVE ULTRASONIC SENSOR CLIP


    1. A0156L1

      Detach the 4 claws and remove the ultrasonic sensor clip.

  4. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR

    Tip:

    Use the same procedure to remove the No. 1 ultrasonic sensor on the other side.


    1. A0158BC

      While pushing down on the lever with a finger to release the one claw, detach the claw on the other side to remove the No. 1 ultrasonic sensor.

      Tip:

      The type of claw on the top and bottom of the sensor are different. Observe the claws carefully before removing the No. 1 ultrasonic sensor.

  5. Click here

    REMOVE NO. 2 ULTRASONIC SENSOR RETAINER

    Tip:

    Use the same procedure to remove the No. 2 ultrasonic sensor retainer on the other side.


    1. A0158HP

      Detach the 2 claws and remove the No. 2 ultrasonic sensor retainer from the front bumper cover.