PARKING ASSIST MONITOR SYSTEM (w/o Side Monitor System) TERMINALS OF ECU


  1. REAR TELEVISION CAMERA ASSEMBLY

    A015DYEE11

    1. Disconnect the S5 rear television camera assembly connector.

    2. Measure the resistance and voltage according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      S5-4 (CB+) - S5-3 (CGND) B - BR Power source Engine switch on (IG), shift lever in R 5.5 to 7.05 V
      S5-3 (CGND) - Body ground BR - Body ground Ground Always Below 1 Ω

    3. Reconnect the S5 rear television camera assembly connector.

      Tech Tips

      A waterproof connector is used for the rear television camera assembly. Therefore, inspect the waveform at the multi-media module receiver assembly with the connector connected.

    4. Measure the waveform according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      S5-2 (CV+) - S5-3 (CGND) R - BR Display signal Engine switch on (IG), shift lever in R Pulse generation( See waveform)
      S5-1 (CV-) - S5-3 (CGND) W - BR Rear television camera ground Always Below 1 V
    5. A01560UE22
      Text in Illustration
      *a Waveform A (camera lens not covered, displaying an image)
      *b Waveform B (camera lens covered, blacking out the screen)
      *c Synchronization Signal
      *d Video Waveform

      Using an oscilloscope, check waveform.

      Tech Tips


      • A waterproof connector is used for the rear television camera assembly. Therefore, inspect the waveform at the navigation receiver assembly with the connector connected.

      • The video waveform changes according to the image sent by the rear television camera assembly.


      1. Waveform

        Item Content
        Terminal No. (Symbol) S5-2 (CV+) - S5-3 (CGND)
        Tool Setting 200 mV/DIV., 50 μsec./DIV.
        Condition

        Waveform A: Engine switch on (IG), shift lever in R and camera lens is not covered, displaying an image

        Waveform B: Engine switch on (IG), shift lever in R and camera lens is covered, blacking out the screen

  2. MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here

  3. POWER BACK DOOR UNIT ASSEMBLY [w/ Power Back Door System] Click here

  4. INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) [w/o Power Back Door System] Click here