DESCRIPTION
The No. 1 ultrasonic sensor (RRC sensor) is installed on the rear bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (RRC sensor). If the No. 1 ultrasonic sensor (RRC sensor) has an open circuit or other malfunction, it will not function normally.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1AE8 | A malfunction of the No. 1 ultrasonic sensor (RRC sensor). |
|
*1: w/ Side Monitor System
*2: w/o Side Monitor System
INSPECTION PROCEDURE
Note
If the DTC is output after repairs, turn the engine switch on (IG) and move the shift lever to R. Then clear the DTC.
PROCEDURE
CHECK FOR DTC
Clear the DTCs Click here.
Check for DTCs Click here.
| OK |
|---|
| DTC C1AE8 is not output. |
| NG |
|
REPLACE NO. 1 ULTRASONIC SENSOR (RRC SENSOR) Click here |
| OK |
|
USE SIMULATION METHOD TO CHECK Click here
REPLACE NO. 1 ULTRASONIC SENSOR (RRC SENSOR)
Replace the No. 1 ultrasonic sensor (RRC sensor) with a normally functioning one Click here.
| NEXT |
|
CHECK FOR DTC
Clear the DTCs Click here.
Check for DTCs Click here.
| Result | Proceed to |
|---|---|
| DTC C1AE8 is not output | A |
| DTC C1AE8 is output (w/ Side Monitor System) | B |
| DTC C1AE8 is output (w/o Side Monitor System) | C |
| B |
|
REPLACE PARKING ASSIST ECU Click here |
| C |
|
REPLACE CLEARANCE WARNING ECU ASSEMBLY Click here |
| A |
|
END (NO. 1 ULTRASONIC SENSOR [RRC SENSOR] IS DEFECTIVE)