DESCRIPTION
The No. 1 ultrasonic sensor (FL sensor) is installed on the front bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (FL sensor). If the No. 1 ultrasonic sensor (FL sensor) has an open or other malfunction, it will not function normally.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1AE1 | A malfunction of the No. 1 ultrasonic sensor (FL sensor). |
|
*1: w/ Side Monitor System
*2: w/o Side Monitor System
INSPECTION PROCEDURE
If the DTC is output after repairs, turn the engine switch on (IG) and move the shift lever to R. Then clear the DTC.
PROCEDURE
CHECK FOR DTC
Clear the DTCs (Click here).
Check for DTCs (Click here).
| OK |
|---|
| DTC C1AE1 is not output. |
REPLACE NO. 1 ULTRASONIC SENSOR (FL SENSOR)
Replace the No. 1 ultrasonic sensor (FL sensor) with a normally functioning one (Click here).
CHECK FOR DTC
Clear the DTCs (Click here).
Check for DTCs (Click here).
| Result | Proceed to |
|---|---|
| DTC C1AE1 is not output | A |
| DTC C1AE1 is output (w/ Side Monitor System) | B |
| DTC C1AE1 is output (w/o Side Monitor System) | C |
END (NO. 1 ULTRASONIC SENSOR [FL SENSOR] IS DEFECTIVE)
USE SIMULATION METHOD TO CHECKClick here
REPLACE CLEARANCE WARNING ECU ASSEMBLYClick here
REPLACE PARKING ASSIST ECUClick here