G-BOOK SYSTEM REGISTRATION

VEHICLE CONTRACT SETTING

1. Contact the G-BOOK center.

   
   

   1. Contact the G-BOOK center to inform them that vehicle contract setting will be performed.

      Tip:

      After contacting the G-BOOK center, the center will send a Vehicle Contract Setting Request Form by fax.

2. Check the ID before replacement (when diagnosis can be activated).

   Tip:

   If the multi-media module receiver assembly is replaced, check the G-BOOK ID.

   
   

   1. Enter diagnostic mode (Click here).

   2. 

      Select "Service Information" on the "Service Menu" screen.

   3. 

      Select "G-BOOK Info for Contract" on the "Service Information" screen.

   4. 

      Check the G-BOOK ID.

3. Replace the multi-media module receiver assembly.

   
   

   1. Replace the multi-media module receiver assembly at a dealership.

4. Check the ID after replacement.

   Tip:

   If the multi-media module receiver assembly is replaced, check the G-BOOK ID.

   
   

   1. Enter diagnostic mode (Click here).

   2. 

      Select "Service Information" on the "Service Menu" screen.

   3. 

      Select "G-BOOK Info for Contract" on the "Service Information" screen.

   4. 

      Check the G-BOOK ID.

5. 

   Fill-in the Vehicle Contract Setting Request Form.

   
   

   1. After filling in the Vehicle Contract Setting Request Form, send it back to the G-BOOK center.

      Item	Information to Enter	Note
      *1	Enter the dealership name of the applicant.	Applicant information
      *2	Enter the name of the applicant.	Applicant information
      *3	Enter the fax number of the dealership.	Dealership information
      *4	Enter the phone number of the dealership.	Dealership information
      *5	Enter the VIN of the vehicle.	Vehicle information
      *6	Enter the G-BOOK ID of the old unit. Left-align the number. If the multi-media module receiver assembly is not being replaced, it is not necessary to enter this item.	Used as change-request information from the dealership
      *7	-	-
      *8	Enter the G-BOOK ID of the new unit installed to the vehicle. Left-align the number. If the multi-media module receiver assembly is not being replaced, it is not necessary to enter this item.	Used as change-request information from the dealership
      *9	-	-
      *10	-	-
      *11	Enter the mileage on the odometer when the multi-media module receiver assembly is replaced.	Used as change-request information from the dealership
      *12	Enter the date that the mileage was recorded.	Used as change-request information from the dealership

6. Perform the procedure to resume the G-BOOK service.

   Tip:

   The screen illustrations provided are samples only and may be different from actual screens.

   
   
   1. 

      Perform the operations shown in the illustration and select G-BOOK.com.

   2. Check that G-BOOK.com is displayed.

   3. After the guidance screen is displayed, perform the procedure to resume the G-BOOK service by following the instructions on the screen.